Google+

Tel: 111 727 777 | Email: ko@rastgar.com

Textiles

Though you might not realize it, dry compressed air affects each and every unit in Textile Industry.

Use of Compressed Air in Textile Industry

In Textile manufacturing units, generally following Compressed air powered pneumatic systems are used :

  • Spinning Machine
  • Loom Jet Weaving
  • Stacking Device
  • Printing Machines
  • Thread Detector
  • Sewing Machine

 Applications

  • Texturing
  • Automated Equipment
  • Agitating Liquids
  • Cleaning
  • Pneumatic Control and Actuators
  • System Cooling
  • Clamping
  • Blowing Out Residual / Dust material
  • Sewing Needle
  • Conveying

 Problems

A major problem in compressed air systems is the presence of moisture / water, dust particles, oil (oils particles are introduced by lubricated air compressors) and solid contaminants which can adversely affect air quality.

If the contaminated compressed air will be used through pneumatic tools and machines then there will be following problems

  • Malfunctioning of pneumatic tools and machines
  • Sluggish and inconsistent operation of valves and cylinder
  • Corrosion in pipe lines, cylinder and other components
  • Increase in downtime
  • Increase in maintenance cost of pneumatic machines / tools / controls
  • Freezing in exposed lines during cold weather
  • Moisture in compressed air also leads to  problems like : Low quality printing in garments

The CompAir Solution

Remove  moisture / water, dust particles, oil (oils particles are introduced by lubricated air compressors) and solid contaminants from compressed air.

CompAir offers wide range of Refrigeration Dryer and Adsorption Dryers which removed water / moisture from compressed air.

CompAir Refrigeration Dryers

This Dryer operates on the method of cooling the air to near freezing point to remove the moisture and reheating it to approximately 10°C below the incoming compressed air temperature at nominal conditions.

CompAir Adsorption Dryer

The Dryers is based on the principle of heatless regeneration and the physical properties of ther desiccant to adsorb and desorb the water vapour, It uses pressure swing principle / purge air to regenerate the desiccant bed.

CompAir Filters

CompAir offers Pre Filters and Oil Filters which removes dust particles, oil particles and other types of solid contaminated  present in dry air.

[maxbutton id=”1″]

Share
Back
Share
Back
Share
Back